PRODUCT DESCRIPTION:
Two component 100% solid pure aromatic polyurea (PUA )
Like PLURYFLEX but self-extinguishing version (Class 1 fire approved)
ADVANTAGES & BENEFITS:
Fast set curing system (10-12sec gel time; 25-30 sec tack-free time)
Seamless coating
No VOC’s and no odors
Ambient moisture insensitive during application
Application until -10°C (-4°F)on site
Short down time
SUBSTRATES :
Concrete, iron, steel, wood, asphalt layer, tiles, sprayed polyurethane or PUR slabs
foam, EPS/XPS (polystyrene).
SUITABLE FOR:
Pedestrian and vehicles flooring where is clearly requested a self-extinguishing
certified product..
Internal industrial flooring
Restoring old asphalt layer without their removing
Notes:
Aesthetical finishing should be done with an aliphatic polyurethane paint like
ELACOLOR.
WAY OF APPLICATION:
Spraying or pouring with a suitable high pressure and high temperature plural
component equipment
SUBSTRATES PREPARATION
Concrete:
Before application check surface must be dry (internal moisture not above 10%),
cleaned and structurally sound. In case of new concrete check the surface must be
without bugholes and do not apply PUA before 28 days from casting of concrete. In
case of application on new or to restore ground floor be sure of the presence of a
vapor barrier.
Steel or wood:
surface must be cleaned, dry and with coarse profile (sandblasting or shotblasting).
Ceramic tiles:
surface must be cleaned, dry, shotblasted, scarified or it should be coarse by acid
etching and with restored seams.
Other kind of surfaces: please consult our technical office.
In any case we suggest (except for restoring of old asphalt layer) to apply a thin layer
of primer EDILPRIM PU one component solvent based pur primer or EDILPRIM EP
three-component waterborne epoxy primer.
| |
|
Products