PRODUCT DESCRIPTION:
Hybrid two components polyureic- polyurethanic elastomer, 100% solids
Asbestos encapsulation Certified.
ADVANTAGES & BENEFITS:
Fast set curing system (6-8sec gel time)
Seamless coating
No VOC’s and no odors
Application even at low temperature
Short down time
SUBSTRATES:
Concrete, iron, steel, wood, asphalt layer, tiles, geotextile non-woven fabrics, sprayed
polyurethane or PUR slabs foam, EPS/XPS (polystyrene).
SUITABLE FOR:
General purpose waterproofing Standard seamless waterproofing
Restoring old asphalt layers without their removing
Waterproofing on the ground.
Asbestos encapsulation (Istituto Giordano Certification)
Notes:
Protect the applied coating with one of this way:
Casting another layer of concret, or
Floating floor, or
Coating with an aliphatic polyurethane paint like ELACOLOR.
WAY OF APPLICATION:
Spraying or pouring with a suitable high pressure and high temperature plural
component equipment.
SUBSTRATES PREPARATION
Concrete:
Before application check surface must be dry (internal moisture not above 10%),
cleaned and structurally sound. In case of new concrete check the surface must be
without bugholes and do not apply EDILCOAT before 28 days from casting of
concrete. In case of application on new or to restore ground floor be sure of the
presence of a vapor barrier.
Steel or wood:
surface must be cleaned, dry and with coarse profile (sandblasting or shotblasting).
Ceramic tiles:
surface must be cleaned, dry, shotblasted, scarified or it should be coarse by acid
etching and with restored seams.
Other kind of surfaces: please consult our technical office.
In any case we suggest (except for restoring of old asphalt layer) to apply a thin layer
of primer EDILPRIM PU one component solvent based pur primer or EDILPRIM EP
three-component waterborne epoxy primer.
| |
|
Products