PRODUCT DESCRIPTION:
Two component 100% solid pure aromatic polyurea (PUA)
(Food contact approved)
ADVANTAGES & BENEFITS:
Fast set curing system (5-8sec gel time)
Excellent salt fog resistant
Very good chemical resistance
No VOC’s and no odors
Ambient moisture insensitive during application
Application until -20°C (-4°F ) on site
Short down time.
SUBSTRATES:
Steel, Iron, GRP ( Glass Reinforced Polyester).
SUITABLE FOR:
Food contact coating
Water Reservoir
Acqueduct
Tanks
WAY OF APPLICATION:
Spraying with a suitable high pressure and high temperature plural component
equipment.
SUBSTRATES PREPARATION
Before application check surfaces dry, cleaned and sound.
Steel, Iron, Wood:
surface must be cleaned, dry and with coarse profile (sandblasting or shotblasting).
Remove debris and dust coming from sand or shotblasting
GRP (Glass Reinforced Polyester):
cleaned, dry, sandblasted, filled with putty in case of cracks or holes. In case of recent
grp wait for complete migration of styrene that is present
In any case we suggest to apply a thin layer of primer EDILPRIM PU one component
solvent based pur primer or EDILPRIM EP three-component waterborne epoxy
primer.
| |
|
